CLI Guide

show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
show ntp status
Display the current NTP status.
Syntax
show ntp status
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ntp status command shown in the following
example.
Field Description
“Clock is...” States whether the switch clock is synchronized, which NTP
stratum the system is assigned and the IP address of the
NTP peer.
System Time
1471