CLI Guide

Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
clock summer-time date — sets a date (and time zone) on which to convert the
switch to daylight saving time on a one-time basis.
show clock — displays the current clock settings.
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the no debug ntp {adjust |
all | authentication | events | loopfilter | packets | select |
sync} command.
Parameters
adjust Enter the keyword adjust to display information on NTP
clock adjustments.
all Enter the keyword all to display information on all NTP
transactions.
authentication Enter the keyword authentication to display information
on NTP authentication transactions.
events Enter the keyword events to display information on NTP
events.
loopfilter Enter the keyword loopfilter to display information on
NTP local clock frequency.
packets Enter the keyword packets to display information on NTP
packets.
select Enter the keyword select to display information on the
NTP clock selection.
sync Enter the keyword sync to display information on the NTP
clock synchronization.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
1462
System Time