CLI Guide

Related
Commands
show logging auditlog — displays audit log, clear logging auditlog — clears audit
log
default logging monitor
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
logging monitor — sets the logging monitor parameters.
terminal monitor — sends system messages to the terminal/monitor.
default logging trap
Return to the default settings for logging messages to the Syslog servers.
Syntax
default logging trap
Defaults level = 6 or informational
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
logging trap — limit messages logged to the Syslog servers based on severity.
1414
Simple Network Management Protocol (SNMP) and Syslog