CLI Guide

group_name Enter a text string (up to 20 characters long) as the name of
the group. The following groups are created for mapping to
read/write community/security-names (defaults):
• v1v2creadu — maps to a community with ro
permissions.
• 1v2cwriteu — maps to a community rw permissions.
remote ip-address Enter the keywords udp-port then the user datagram
protocol (UDP) port number on the remote device. The
range is from 0 to 65535. The default is 162.
udp-port port-
number
Enter the keywords udp-port then the UDP (User
Datagram Protocol) port number on the remote device. The
range is from 0 to 65535. The default is 162.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c,
or 3):
• 1 is the least secure version.
• 3 is the most secure of the security modes.
• 2c allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1.
encrypted (OPTIONAL) Enter the keyword encrypted to specify the
password appear in encrypted format (a series of digits,
masking the true characters of the string).
auth (OPTIONAL) Enter the keyword auth to specify
authentication of a packet without encryption.
md5 | sha (OPTIONAL) Enter the keyword md5 or sha to designate the
authentication level.
• md5 — Message Digest Algorithm
• sha — Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host and to send packets to the host. Minimum: eight
characters long.
priv des56 (OPTIONAL) Enter the keywords priv des56 to initiate a
privacy authentication level setting using the CBC-DES
privacy authentication algorithm (des56).
aes128 (OPTIONAL) Enter the keyword aes128 to initiate the
AES128-CFB encryption algorithm for transmission of SNMP
packets.
Simple Network Management Protocol (SNMP) and Syslog
1407