CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following Example displays a group named ngroup. The ngroup has a security
model of version 3 (v3) with authentication (auth), the read and notify name is
nview with no write view name specified, and finally the row status is active.
Example
Dell#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
Dell#
Related
Commands
snmp-server group — configures an SNMP server group.
show snmp user
Display the information configured on each SNMP user name.
Syntax
show snmp user
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
Dell#
1394
Simple Network Management Protocol (SNMP) and Syslog