CLI Guide

show tech-support
Displays a collection of data from other show commands, necessary for Dell Networking technical
support to perform troubleshooting on Aggregators.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU
memory usage for the stack member designated by unit-id.
The range is 0 to 5.
page (OPTIONAL) Enter the keyword page to view 24 lines of text
at a time. Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these
keywords to filter command output. Refer to CLI Basics for
details on filtering commands.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename (max
20 chars))
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
Without the page or stack-unit option, the command output is continuous, use
Ctrl-z to interrupt the command output.
The save option works with other filtering commands. This allows you to save
specific information of a show command. The
save entry must always be the last
option.
For example: Dell#show tech-support |grep regular-expression |
except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed
when you execute one of the following showcommands:
• show cam
Control and Monitoring
137