CLI Guide

show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
mode mode Enter keyword then one of the following modes.
• configure
• exec
• interface
• line
• route-map
• router
Defaults none
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
Examples
Dell#show role mode configure username
Role access: sysadmin
Dell#show role mode configure management route
Role access: netadmin, sysadmin
Dell#show role mode configure management crypto-policy
Role access: secadmin, sysadmin
Related
Commands
userrole — creates user roles for the role-based security model.
show userroles
Display information on all defined user roles.
Syntax
show userroles
1366
Security