CLI Guide

Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000,
S4810, S4820T, S3048–ON, S4048–ON, MXL, C9010,
S3100 series, and Z9100-ON.
Usage Information
• You can select one or more MAC algorithms from the list.
• Client-supported MAC list gets preference over the server-supported MAC list
in selecting the MAC algorithm for the SSH session.
• When the MAC (-m) option is used with the SSH CLI, it overrides the
configured or default MAC list.
• When FIPS is enabled or disabled, the client MACs get default configuration.
ip ssh password-authentication
Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-
authentication enable command.
Parameters
enable Enter the keyword enable to enable password-
authentication for the SSH server.
Defaults Enabled
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information With password authentication enabled, you can authenticate using the local,
RADIUS, or TACACS+ password fallback order as configured.
ip ssh rhostsfile
Specify the rhost file used for host-based authorization.
Syntax
ip ssh rhostsfile {WORD}
Parameters
WORD Enter the rhost file name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Security
1357