CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

1351

Parameters

1-10 Enter the number of maximum retries to authenticate a

user. The range is from 1 to 10. The default is 3.

Defaults 3

Command Modes CONFIGURATION

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information This command specifies the maximum number of attempts to authenticate a user

on an SSH connection with the remote host for password authentication. SSH

disconnects when the number of password failures exceeds authentication-retries.

ip ssh cipher

Configure the list of ciphers supported on both SSH client and SCP.

Syntax

ip ssh cipher cipher-list

Parameters

cipher cipher-list Enter the keyword cipher and then a space-delimited list

of ciphers that the SSH client supports. The following

ciphers are available.

• aes256-ctr

• aes256-cbc

• aes192-ctr

• aes192-cbc

• aes128-ctr

• aes128-cbc

• 3des-cbc

Defaults The default list of ciphers is in the order as shown below: