CLI Guide

To disable AAA Accounting, use the no aaa accounting {system | exec |
command level} {name | default}{start-stop | wait-start | stop-
only} {tacacs+} command
Parameters
system Enter the keyword system to send accounting information
of any other AAA configuration.
exec Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
commands level Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS+
security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting.
Dell Networking OS currently only supports TACACS+ accounting.
Defaults None
Command Modes CONFIGURATION
Usage Information In the example above, TACACS+ accounting is used to track all usage of EXEC
command and commands on privilege level 15. Privilege level 15 is the default. If
you want to track usage at privilege level 1 for example, use theaaa accounting
command 1 command.
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Supported on the FN I/O Agregator and M I/O Aggregator.
1346
Security