CLI Guide

DHCP debugging is on
Dell#
show diag
Display the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]]
| testcase}
Parameters
information Enter the keyword information to view current
diagnostics information in the system.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the unit-
id to display information on a specific stack member. The
range is from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed
diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary
of the diagnostics information.
testcase Enter the keyword testcase to view current diagnostics
testcases available in the system.
Defaults Summary
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
show environment
Displays the system component status (for example, temperature or voltage).
Syntax
show environment [all | stack-unit unit-id]
Parameters
all Enter the keyword all to view all components.
124
Control and Monitoring