CLI Guide

Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The type may be auto, manual, or rollback. When set to auto, Dell Networking OS
automatically denies access to CONFIGURATION mode to all other users every
time the user on the listed VTY line enters CONFIGURATION mode. When set to
manual, the user on the listed VTY line must explicitly set the lock each time before
entering CONFIGURATION mode. Rollback indicates that Dell Networking OS is in
a rollback process. The line number shown in the output can be used to send the
messages to that session or release a lock on a VTY line.
Example
Dell#show configuration lock
Configure exclusively locked by the following line:
Line : vty 0
Line number : 2
User : admin
Type : AUTO
State : LOCKED
Ip address : 10.11.9.97
Dell#
show cpu-traffic-stats
Display the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all]
Parameters
port number (OPTIONAL) Enter the port number to display traffic
statistics on that port only. The range is from 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
Defaults all
Command Modes EXEC
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
122
Control and Monitoring