CLI Guide

show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
Syntax
show vlan private-vlan mapping
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced the on MXL 10/40GbE Switch IO Module.
Usage Information
The output of this command, shown below, displays the community and isolated
VLAN IDs that are associated with each primary VLAN.
Example
Dell# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
Related
Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
show vlan private-vlan — displays type and status of PVLAN interfaces.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
1204
Private VLAN (PVLAN)