CLI Guide

primary (OPTIONAL) Enter the keyword primary to display VLANs
configured as primary VLANs, along with their interfaces.
primary_vlan (OPTIONAL) Enter a private VLAN ID or secondary VLAN ID
to display interface details about the designated PVLAN.
interface interface (OPTIONAL) Enter the keyword interface and an interface
ID to display the PVLAN configuration of the designated
interface.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Examples of all types of command output are shown below. The first type of
output is the result of not entering an optional keyword. It displays a detailed list of
all PVLANs and their member VLANs and interfaces. The other types of output
show details about PVLAN subsets.
The following describes the show private-vlan command shown in the
Examples below.
Field Description
Primary Displays the VLAN ID of the designated or associated
primary VLAN(s).
Secondary Displays the VLAN ID of the designated or associated
secondary VLAN(s).
Type Displays the type of VLAN in which the listed interfaces
reside.
Active States whether the interface is operationally up or down.
Ports Displays the interface IDs in the listed VLAN.
Example (All)
Dell# show vlan private-vlan
Primary Secondary Type Active Ports
------- --------- --------- ------ -----------
10 primary Yes Gi 2/1,3
100 isolated Yes Gi 2/2
101 community Yes Gi 2/10
20 primary Yes Po 10, 12-13
Gi 3/1
200 isolated Yes Gi 3/2,4-6
1202
Private VLAN (PVLAN)