CLI Guide

Related
Commands
private-vlan mapping secondary-vlan — maps secondary VLANs to the selected
primary VLAN.
show interfaces private-vlan — displays the type and status of the PVLAN
interfaces.
show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a
PVLAN.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show interfaces private-vlan
Display type and status of PVLAN interfaces.
Syntax
show interfaces private-vlan [interface interface]
Parameters
interface interface (OPTIONAL) Enter the keyword interface then the ID of
the specific interface for which to display PVLAN status.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command has two types of display — a list of all PVLAN interfaces or for a
specific interface. Examples of both types of output are shown below.
The following describes the show interfaces private-vlan command shown
in the following examples.
Field Description
Interface Displays the type of interface and associated slot and port
number.
Vlan Displays the VLAN ID of the designated interface.
1200
Private VLAN (PVLAN)