CLI Guide

ipv6 pim spt-threshold
Specifies when a PIM leaf router should join the shortest path tree.
Syntax
ipv6 pim spt-threshold {kbps | infinity}
To return to the default value, use the no ipv6 pim spt-threshold command.
Parameters
kbps Enter a traffic rate in kilobytes per second. The range is from
0 to 4294967 kbps. The default is 10 kbps.
infinity Enter the keyword infinity to have all sources for the
specified group use the shared tree and never join shortest
path tree (SPT).
Defaults 10 kbps
Command Modes CONFIGURATION
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information PIM leaf routers join the shortest path tree immediately after the first packet arrives
from a new source.
show ipv6 pim bsr-router
View information on the Bootstrap router (v2).
Syntax
show ipv6 pim bsr-router
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Swtich
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ipv6 pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
BSR address: 14::2
1184
PIM-Sparse Mode (PIM-SM)