CLI Guide

Field Description
Incoming
interface
Displays the reverse path forwarding (RPF) interface towards
the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/
source.
Outgoing
interface list:
Lists the interfaces that meet one of the following criteria:
• a directly connect member of the Group
• statically configured member of the Group
• received a (*,G) Join message
Example
Dell#show ip pim tib
PIM Multicast Routing Table
Flags:D- Dense, S- Sparse, C- Connected, L- Local, P- Pruned,
R- RP-bit set, F- Register flag, T- SPT-bit set, J- Join
SPT,
M- MSDP created entry, A- Candidate for MSDP
Advertisement,
K- Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 0/2, RPF neighbor
10.211.1.2
Outgoing interface list:
TenGigabitEthernet 0/8
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 1/2, RPF neighbor
10.211.1.2
Outgoing interface list:
TenGigabitEthernet 0/8
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 1/2, RPF neighbor
10.211.1.2
Outgoing interface list:
TenGigabitEthernet 0/8
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 1/2, RPF neighbor
10.211.1.2
Outgoing interface list:
TenGigabitEthernet 0/8
1176
PIM-Sparse Mode (PIM-SM)