CLI Guide

show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb
interface | stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client
information.
summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the slot/port information to display interface
control block information for that interface:
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
stack-unit unit-ID Enter the keywords stack-unit then the stack member
number to display IFM information for that unit. The range is
from 0 to 5.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
DELL#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0xb98784a1 22
RTM 0 0x00000000 0x00000000 0x800010ff 0x0064c798 56
RIP 0 0x00000dfe 0x00000000 0x00000000 0x00000000 0
ISIS 0 0x00000002 0x00000000 0x00000000 0x00000000 0
VRRP 0 0x00000000 0x00000000 0x803330f3 0x0013c480 38
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0xdb80c800 64
ACL 0 0x00000000 0x00000000 0x867f50c3 0x0103c018 81
116
Control and Monitoring