CLI Guide

show crypto ipsec sa ipv6
Display the IPsec security associations (SAs) used on OSPFv3 interfaces.
Syntax
show crypto ipsec sa ipv6 [interface interface]
Parameters
interface interface
(OPTIONAL) Displays information about the SAs used on a
specified OSPFv3 interface, where interface is one of the
following values:
• For a Port Channel interface, enter port-channel then
the port channel number.
• For a 10-Gigabit Ethernet interface, enter
TenGigabitEthernet then the slot/port number.
• For a VLAN interface, enter vlan vlan-id. The valid
VLAN IDs range is from 1 to 4094.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The show crypto ipsec sa ipv6 command output displays security
associations set up for OSPFv3 links in IPsec authentication and encryption policies
on the router.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Syntax
show ipv6 ospf database [database-summary | grace-lsa]
Parameters
database-
summary
(OPTIONAL) Enter the keywords database-summary to
view a summary of database LSA information.
Open Shortest Path First (OSPFv2 and OSPFv3)
1139