CLI Guide

Example
Dell(conf)#router ospf 100
Dell(conf-router_ospf)#router-id 1.1.1.1
Changing router-id will bring down existing OSPF adjacency [y/
n]:
Dell(conf-router_ospf)#show config
!
router ospf 100
router-id 1.1.1.1
Dell(conf-router_ospf)#no router-id
Changing router-id will bring down existing OSPF adjacency [y/
n]:
Dell#
show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
Syntax show crypto ipsec policy [name name]
Parameters
name name (OPTIONAL) Displays configuration details about a specified
policy.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The show crypto ipsec policy command output displays the AH and ESP
parameters configured in IPsec security policies, including the SPI number, keys,
and algorithms used.
When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs
that it receives from a restarting OSPFv3 neighbor.
1138
Open Shortest Path First (OSPFv2 and OSPFv3)