CLI Guide

0
No-Buffer 0 Seq-No 0 Socket 0
Q-OverFlow 0 Unknown-Pkt 0 RtidZero
0
Error packets (Transmit statistics)
Socket Errors 0
Dell#
Usage Information The show ip ospf process-id statistics command displays the error
packet count received on each interface as:
• The hello-timer remaining value for each interface
• The wait-timer remaining value for each interface
• The grace-timer remaining value for each interface
• The packet count received and transmitted for each neighbor
• Dead timer remaining value for each neighbor
• Transmit timer remaining value for each neighbor
• The LSU Q length and its highest mark for each neighbor
• The LSR Q length and its highest mark for each neighbor
Example (Statistics)
Dell#show ip ospf 10 statistics
Interface TenGigabitEthernet 4/45
Error packets (Receive statistics)
Intf-Down 0 Non-Dr 0 Self-Org 0
Wrong-Len 0 Invld-Nbr 0 Nbr-State 0
Auth-Error 0 MD5-Error 0 Cksum-Err 0
Version 0 AreaMisMatch 0 Conf-Issue 0
SeqNo-Err 0 Unknown-Pkt 0 Bad-LsReq 0
RtidZero 0
Neighbor ID 3.1.1.2
Packet Statistics
Hello DDiscr LSReq LSUpd LSAck
RX 47 2 1 3 2
TX 46 3 1 3 2
Timers
Hello 1 Wait 0 Grace 0
Dead 37 Transmit 0
Queue Statistics
LSU-Q-Len 0 LSU-Q-Wmark 1
LSR-Q-Len 0 LSR-Q-Wmark 1
Dell#
Related
Commands
clear ip ospf statistics — clears the packet statistics in all interfaces and neighbors.
show ip ospf timers rate-limit
Show the LSA currently in the queue waiting for timers to expire.
Syntax
show ip ospf process-id timers rate-limit
Open Shortest Path First (OSPFv2 and OSPFv3)
1111