CLI Guide

Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip ospf statistics — displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging
for the first OSPF process.
Syntax
debug ip ospf process-id [bfd |event | packet | spf | database-
timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
bfd (OPTIONAL) Enter the keyword bfd to debug only OSPF
BFD information.
event (OPTIONAL) Enter the keyword event to debug only OSPF
event information.
packet (OPTIONAL) Enter the keyword packet to debug only OSPF
packet information.
spf (OPTIONAL) Enter the keyword spf to display the Shortest
Path First information.
database-timer
rate-limit
(OPTIONAL) Enter the keywords database-timer rate-
limit to display the LSA throttling timer information.
Command Modes EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the debug ip ospf command shown in the Example
below.
Open Shortest Path First (OSPFv2 and OSPFv3)
1059