CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

1041

Command Modes

• EXEC

• EXEC Privilege

Supported Modes All modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.6(0.0) Supported on the FN2210S Aggregator.

9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE

Switch with the FC Flex IO module.

Example

Dell(conf)#do show fc sw

Switch Mode : NPG

Switch WWN : 10:00:00:1e:c9:f1:00:d7

show interfaces status

Displays a summary of interface information or specify a stack unit and interface to display status

information for that specific interface only.

Syntax

show interfaces [interface | stack-unit unit-number] status

Parameters

interface (OPTIONAL) Enter one of the following keywords and slot/

port or number information:

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

linecard slot-

number

(OPTIONAL) Enter the keyword linecard then the slot

number.

Defaults none