CLI Guide

size date time name
-------- ------ ------ --------
512 Jul-20-2004 18:15:00 tgtimg
512 Jul-20-2004 18:15:00 diagnostic
512 Jul-20-2004 18:15:00 other
512 Jul-20-2004 18:15:00 tgt
226 Transfer complete
329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>
Related
Commands
ftp-server topdir— sets the directory to be used for incoming FTP connections.
ftp-server username— sets a username and password for incoming FTP
connections.
ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the M I/O Aggregator.
ftp-server username— sets a username and password for incoming FTP
connections to the M I/O Aggregator.
Control and Monitoring
103