CLI Guide

Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 0/2
Outgoing interface list:
TenGigabitEthernet 0/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: TenGigabitEthernet 1/4
Outgoing interface list:
TenGigabitEthernet 0/6
TenGigabitEthernet 0/7
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 1/2
Outgoing interface list:
TenGigabitEthernet 1/4
Usage Information The following describes the show ip mroute command shown in the following
example.
Field Description
(S, G) Displays the forwarding entry in the multicast route table.
uptime Displays the amount of time the entry has been in the
multicast forwarding table.
Incoming
interface
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Outgoing
interface list:
Lists the interfaces that meet one of the following:
• a directly connected member of the Group
• statically configured member of the Group
• received a (*,G) or (S,G) Join message
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 1/2
Outgoing interface list:
TenGigabitEthernet 3/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: TenGigabitEthernet 1/4
Outgoing interface list:
TenGigabitEthernet 0/2
TenGigabitEthernet 0/3
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 1/2
Multicast
1029