CLI Guide

Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
spanning-tree msti
Configure multiple spanning tree instance cost and priority for an interface.
Syntax
spanning-tree msti instance {cost cost | priority priority}
Parameters
msti instance Enter the keyword msti and the MST instance number. The
range is from zero (0) to 63.
cost cost (OPTIONAL) Enter the keyword cost then the port cost
value. The range is from 1 to 200000. The defaults are:
• 10-Gigabit Ethernet interface = 2000
• Port Channel interface with one 10 Gigabit Ethernet =
2000
• Port Channel with two 10 Gigabit Ethernet = 1800
• Port Channel with two 100 Mbps Ethernet = 180000
priority priority Enter keyword priority then a value in increments of 16
as the priority. The range is from 0 to 240. The default is
128.
Defaults
• cost = depends on the interface type
• priority = 128
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Multiple Spanning Tree Protocol (MSTP)
1021