CLI Guide

name — assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
Syntax
show config
Command Modes MULTIPLE SPANNING TREE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
Dell(conf-mstp)#
show spanning-tree mst configuration
View the multiple spanning tree configuration.
Syntax
show spanning-tree mst configuration
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Enable the multiple spanning tree protocol prior to using this command.
Multiple Spanning Tree Protocol (MSTP)
1017