CLI Guide

max-age
To maintain configuration information before refreshing that information, set the time interval for the
MSTB.
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age Enter a number of seconds the system waits before
refreshing configuration information. The range is from 6 to
40. The default is 20 seconds.
Defaults 20 seconds
Command Modes MULTIPLE SPANNING TREE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
edge-port bpdufilter default — the amount of time the interface waits in the
Blocking State and the Learning State before transitioning to the Forwarding State.
hello-time — changes the time interval between BPDUs.
max-hops
Configure the maximum hop count.
Syntax
max-hops number
To return to the default values, use the no max-hops command.
Parameters
range Enter a number for the maximum hop count. The range is
from 1 to 40. The default is 20.
Defaults 20 hops
Command Modes MULTIPLE SPANNING TREE
Supported Modes Full–Switch
Multiple Spanning Tree Protocol (MSTP)
1013