Administrator Guide

Fc 0/9
Te 0/11 Te 0/12
Table 71. show fcoe-map Field Descriptions
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID The dedicated VLAN used to transport FCoE storage traffic between
servers and a fabric over the NPG. The configured VLAN ID must be the
same as the fabric ID.
VLAN priority FCoE traffic uses VLAN priority 3. This setting is not user-configurable.
FC-MAP FCoE MAC-address prefix value - The unique 24-bit MAC address prefix
that identifies a fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE
map are valid: Active (all mandatory FCoE and FC parameters are correctly
configured) or Incomplete (either the FC-MAP value, fabric ID, or VLAN ID
are not correctly configured).
Oper-State Operational status of the link to the fabric: up (link is up and transmitting
FC traffic), down (link is down and not transmitting FC traffic), link-wait
(link is up and waiting for FLOGI to complete on peer FC port), or removed
(port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated FCoE
VLAN that carries storage traffic to the specified fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
NPIV Proxy Gateway 937