Administrator Guide
Dell(config-std-nacl)#line vty 0
Dell(config-line-vty)#show config
line vty 0
access-class myvtyacl
Dell OS Behavior: Prior to Dell OS version 7.4.2.0, in order to deny access on a VTY line, apply an ACL and
accounting, authentication, and authorization (AAA) to the line. Then users are denied access only after they
enter a username and password. Beginning in Dell OS version 7.4.2.0, only an ACL is required, and users are
denied access before they are prompted for a username and password.
Configuring Login Authentication for Terminal
Lines
You can use any combination of up to six authentication methods to authenticate a user on a terminal line.
A combination of authentication methods is called a method list. If the user fails the first authentication
method, the system prompts the next method until all methods are exhausted, at which point the connection
is terminated. The available authentication methods are:
enable
Prompt for the enable password.
line
Prompt for the password you assigned to the terminal line. Configure a password for
the terminal line to which you assign a method list that contains the line authentication
method. Configure a password using the password command from LINE mode.
local
Prompt for the system username and password.
none
Do not authenticate the user.
radius
Prompt for a username and password and use a RADIUS server to authenticate.
tacacs+
Prompt for a username and password and use a TACACS+ server to authenticate.
1 Configure an authentication method list. You may use a mnemonic name or use the default keyword.
The default authentication method for terminal lines is local and the default method list is empty.
CONFIGURATION mode
aaa authentication login {method-list-name | default} [method-1] [method-2]
[method-3] [method-4] [method-5] [method-6]
2 Apply the method list from Step 1 to a terminal line.
CONFIGURATION mode
login authentication {method-list-name | default}
3 If you used the line authentication method in the method list you applied to the terminal line, configure
a password for the terminal line.
LINE mode
password
Example of Terminal Line Authentication
In the following example, VTY lines 0-2 use a single authentication method, line.
Dell(conf)#aaa authentication login myvtymethodlist line
Dell(conf)#line vty 0 2
Dell(config-line-vty)#login authentication myvtymethodlist
Management 91