Administrator Guide

Displaying Broadcast-Storm Control
Status
To display the status of a current storm control operation, use the show io-aggregator broadcast
storm-control status command from EXEC Privilege mode.
Configuring Storm Control
The following configurations are available only in PMUX mode.
1 To configure the percentage of broadcast traffic allowed on an interface, use the storm-control
broadcast [packets_per_second in] command from INTERFACE mode.
2 To configure the percentage of multicast traffic allowed on an interface, use the storm-control
multicast [packets_per_second in] command from INTERFACE mode.
3 To configure the percentage of unknown-unicast traffic allowed on an interface, use the storm-
control unknown-unicast [packets_per_second in] command from INTERFACE mode.
Broadcast Storm Control 868