Administrator Guide

Displaying iSCSI Optimization
Information
To display information on iSCSI optimization, use the show commands detailed in the below table:
Table 29. Displaying iSCSI Optimization Information
Command Output
show iscsi Displays the currently configured iSCSI settings.
show iscsi sessions Displays information on active iSCSI sessions on the
switch that have been established since the last reload.
show iscsi sessions detailed [session isid] Displays detailed information on active iSCSI sessions on
the switch. To display detailed information on specified
iSCSi session, enter the session’s iSCSi ID.
show run iscsi Displays all globally-configured non-default iSCSI settings
in the current Dell Networking OS session.
show iscsi Command Example
Dell# show iscsi
iSCSI is enabled
iSCSI session monitoring is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
show iscsi sessions Command Example
Dell# show iscsi sessions
Session 0:
-----------------------------------------------------------------------------------
------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-----------------------------------------------------------------------------------
------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
iSCSI Optimization 494