Administrator Guide
Showing IPv6 Information
Dell Networking OS supports all of the following show commands.
View specific IPv6 configuration with the following commands.
• List the IPv6 show options.
EXEC mode or EXEC Privileged mode
show ipv6 ?
Example of show ipv6 Command Options
Dell#show ipv6 ?
accounting IPv6 accounting information
cam IPv6 CAM Entries
fib IPv6 FIB Entries
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
Dell#
Showing an IPv6 Interface
To view the IPv6 configuration for a specific interface, use the following command.
• Show the currently running configuration for the specified interface.
EXEC mode
show ipv6 interface type {slot/port}
Enter the keyword interface then the type of interface and slot/port information:
• For all brief summary of IPv6 status and configuration, enter the keyword brief.
• For all IPv6 configured interfaces, enter the keyword configured.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port
information.
• For a loopback interface, enter the keyword loopback then the loopback number.
• For a port-channel interface, enter the keywords port-channel then the port-channel number.
• For a VLAN interface, enter the keyword vlan then the VLAN ID.
IPv6 Routing 484