Administrator Guide

Debugging FIP Snooping
To enable debug messages for FIP snooping events, enter the debug fip-snooping command..
1 Enable FIP snooping debugging on for all or a specified event type, where:
all enables all debugging options.
acl enables debugging only for ACL-specific events.
error enables debugging only for error conditions.
ifm enables debugging only for IFM events.
info enables debugging only for information events.
ipc enables debugging only for IPC events.
rx enables debugging only for incoming packet traffic.
EXEC PRIVILEGE mode
debug fip-snooping [all | acl | error | ifm | info | ipc | rx]
To turn off debugging event messages, enter the no debug fip-snooping command.
FIP Snooping 391