Administrator Guide

FCoE Transit Configuration Example
The following illustration shows an FN IOM switch used as a FIP snooping bridge for FCoE traffic between an
ENode (server blade) and an FCF (ToR switch). The ToR switch operates as an FCF and FCoE gateway.
In this example, DCBx and PFC are enabled on the FIP snooping bridge and on the FCF ToR switch. On the
FIP snooping bridge, DCBx is configured as follows:
Figure 36. FIP Snooping on an FN IOMSwitch Configuration Example
A server-facing port is configured for DCBx in an auto-downstream role.
An FCF-facing port is configured for DCBx in an auto-upstream or configuration-source role.
FCoE Transit 353