Administrator Guide

Displaying the Fabric Parameters
To display information on switch-wide and interface-specific fabric parameters, use the show commands in
the following table.
Examples of these show commands follow this table.
Command Description
show config Displays the fabric parameters.
show fcoe-map Displays the fcoe-map.
show fc ns switch Display all the devices in name server database of the switch.
show fc ns switch
brief
Display all the devices in name server database of the switch - brief version.
show fc zoneset Displays the zoneset.
show fc zoneset
active
Displays the active zoneset.
show fc zone Displays the configured zone.
show fc alias Displays the configured alias.
show fc switch Displays the FC Switch mode and world wide name.
Example of the show config Command
Dell(conf-fcoe-SAN_FABRIC)#show config
!
fcoe-map SAN_FABRIC
description SAN_FABRIC
fc-map 0efc00
fabric-id 1002 vlan 1002
!
fc-fabric
default-zone-allow all
Dell(conf-fcoe-SAN_FABRIC)#
Example of the show fcoe-map Command
Dell(conf)#do show fcoe-map
Fabric Name map
Fabric Type Fport
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
=======================================================
Switch Config Parameters
=======================================================
FC FPORT 334