Administrator Guide

Sequence Number: 2
Acknowledgment Number: 2
Protocol State: In-Sync
Peer DCBX Status:
----------------
DCBX Operational Version is 0
DCBX Max Version Supported is 255
Sequence Number: 2
Acknowledgment Number: 2
2 Input PFC TLV pkts, 3 Output PFC TLV pkts, 0 Error PFC pkts, 0 PFC Pause Tx pkts,
0 Pause Rx pkts
2 Input PG TLV Pkts, 3 Output PG TLV Pkts, 0 Error PG TLV Pkts
2 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV pkts, 0 Error Appln
Priority
TLV Pkts
Total DCBX Frames transmitted 27
Total DCBX Frames received 6
Total DCBX Frame errors 0
Total DCBX Frames unrecognized 0
The following table describes the show interface DCBx detail command fields.
Table 15. show interface DCBx detail Command Description
Field Description
Interface Interface type with chassis slot and port number.
Port-Role Configured DCBx port role: auto-upstream or auto-
downstream.
DCBx Operational Status Operational status (enabled or disabled) used to elect
a configuration source and internally propagate a
DCB configuration. The DCBx operational status is
the combination of PFC and ETS operational status.
Configuration Source Specifies whether the port serves as the DCBx
configuration source on the switch: true (yes) or false
(no).
Local DCBx Compatibility mode DCBx version accepted in a DCB configuration as
compatible. In auto-upstream mode, a port can only
received a DCBx version supported on the remote
peer.
Local DCBx Configured mode DCBx version configured on the port: CEE, CIN, IEEE
v2.5, or Auto (port auto-configures to use the DCBx
version received from a peer).
Peer Operating version DCBx version that the peer uses to exchange DCB
parameters.
Local DCBx TLVs Transmitted Transmission status (enabled or disabled) of
advertised DCB TLVs (see TLV code at the top of the
show command output).
Local DCBx Status: DCBx Operational Version DCBx version advertised in Control TLVs.
Data Center Bridging (DCB) 307