Administrator Guide

Cloning Configuration Output Status
If you specify the XML option in the CLI, the output of the CLI commands is displayed in XML format.
The output includes the following parameters:
• Cloning state displays one of the following status:
• Success
• Warning
• Failure
• Cloning detailed status displays a string that gives detailed description of cloning status. When multiple
error or warning messages are present, the status is separated by the ; delimiter.
• Cloning status codes are useful when there are multiple warning or failure messages. Each warning or
failure message is given a code number; this status can list the message codes that can be decoded
when the cloning status string could not accommodate all the errors and warnings.
• Number of Reboots count the number of reboots required to complete the cloning operation. The
reboot details can be displayed only when the clonability check is done.
Table 8. Cloning Status
Cloning state (captured in
command output)
Cloning status (captured in
command output)
Applicability
Success Cloning file successfully created Source
Success Cloning file compatibility passed Target
Success Target IOA is up and running with
cloning config.
Target
Failure Failed to create running-
configuration
Source
Failure Failed to extract release
information
Source
Failure Failed to extract platform
information
Source
Failure Release version info missing in
header
Target
Failure Platform info missing in header Target
Failure IOM — mode info missing in
header
Target
Failure Cloning header missing Target
Configuration Cloning 262