Administrator Guide

to VLAN interfaces is similar to the behavior of ACL-VLAN mapping storage in CAM prior to the
implementation of the ACL VLAN group functionality.
1 Create an ACL VLAN group
CONFIGURATION mode
acl-vlan-group {group name}
You can have up to eight different ACL VLAN groups at any given time.
2 Add a description to the ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
description description
3 Apply an egress IP ACL to the ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
ip access-group {group name} out implicit-permit
4 Add VLAN member(s) to an ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
member vlan {VLAN-range}
5 Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name.
CONFIGURATION (conf-acl-vl-grp) mode
show acl-vlan-group {group name | detail}
Dell#show acl-vlan-group detail
Group Name :
TestGroupSeventeenTwenty
Egress IP Acl :
SpecialAccessOnlyExpertsAllowed
Vlan Members :
100,200,300
Group Name :
CustomerNumberIdentificationEleven
Egress IP Acl :
AnyEmployeeCustomerElevenGrantedAccess
Vlan Members :
2-10,99
Group Name :
HostGroup
Egress IP Acl :
Group5
Vlan Members :
1,1000
Dell#
Configuring FP Blocks for VLAN Parameters
Use the cam-acl-vlan command to allocate the number of FP blocks for the various VLAN processes on
the system. You can use the
no version of this command to reset the number of FP blocks to default. By
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 122