Administrator Guide

Field Description
Remote Parameters ETS configuration on remote peer port, including
Admin mode (enabled if a valid TLV was received or
disabled), priority groups, assigned dot1p priorities,
and bandwidth allocation. If the ETS Admin mode is
enabled on the remote port for DCBx exchange, the
Willing bit received in ETS TLVs from the remote peer
is included.
Local Parameters ETS configuration on local port, including Admin
mode (enabled when a valid TLV is received from a
peer), priority groups, assigned dot1p priorities, and
bandwidth allocation.
Operational status (local port) Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were
exchanged with peer.
• Recommend: Remote ETS configuration
parameters were received from peer.
• Internally propagated: ETS configuration
parameters were received from configuration
source.
ETS DCBx Oper status Operational status of ETS configuration on local port:
match or mismatch.
State Machine Type Type of state machine used for DCBx exchanges of
ETS parameters:
• Feature: for legacy DCBx versions
• Asymmetric: for an IEEE version
Conf TLV Tx Status Status of ETS Configuration TLV advertisements:
enabled or disabled.
ETS TLV Statistic: Input Conf TLV pkts Number of ETS Configuration TLVs received.
ETS TLV Statistic: Output Conf TLV pkts Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic: Error Conf TLV pkts Number of ETS Error Configuration TLVs received.
Dell(conf)# show stack-unit all stack-ports all pfc details
stack unit 0 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
stack unit 1 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
FC Flex IO Modules 1082