Concept Guide

mac-address-table static (for Multicast MAC
Address)
For multicast mode of network load balancing (NLB), congure a static multicast MAC address, associate the multicast MAC address with
the VLAN used to switch Layer 2 multicast trac, and add output ports that will receive multicast streams on the VLAN. To delete a
congured static multicast MAC address from the MAC address table on the router, enter the
no mac-address-table static
multicast-mac-address command.
Syntax
mac-address-table static multicast-mac-address multicast vlan vlan-id range-
output {single-interface | interface-list | interface-range}
To remove a MAC address, use the no mac-address-table static multicast-mac-address
output interface vlan vlan-id command.
Parameters
multicast-mac-
address
Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
multicast Enter a vlan port to where L2 multicast MAC trac is forwarded.
NOTE: Use this option if you want multicast functionality in an L2 VLAN without
IGMP protocols.
output interface For a multicast MAC address, enter the keyword output then one of the following
interfaces for which trac is forwarded:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
output-range
interface
For a multicast MAC address, enter the keyword output-range then one of the
following interfaces to indicate a range of ports for which trac is forwarded:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to 4094.
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Added support for multicast MAC address on the MXL platform.
Example (Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan 2 output—range Te
0/2,Te 0/3}
Microsoft Network Load Balancing 867