Concept Guide

Field Description
Prex Length Displays the prex-length or mask for the IP address congured on the linecard 0 port
pipe 0.
Current Use Displays the number of routes currently congured for the corresponding prex or mask
on the linecard 0 port pipe 0.
Initial Size Displays the CAM size the system allocates for the corresponding mask. The system
adjusts the CAM size if the number of routes for the mask exceeds the initial allocation.
Example (ECMP-
Group)
Dell#show ip cam stack-unit 0 po 0 ecmp-group detail
Destination EC CG V C VId Mac-Addr Port ECMP Group-Index
----------------- -- -- - ----- ---------------- -------------
1.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 -
2.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 -
1.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
1.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 0
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 0
0.0.0.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
Dell#
Example (Member-
Info)
Dell#show ip cam stack-unit 0 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID Gateway
----------- ------------------------------- ------------------
0 2 00:01:e8:8a:d6:58 Te 0/3 0 1.1.1.2
00:01:e8:8a:d6:58 Te 0/8 0 2.1.1.2
Dell#
show ip b stack-unit
View all FIB entries.
Syntax
show ip fib stack-unit 0–5 [ip-address [mask] [longer-prefixes] | summary]
Parameters
0–5 Enter the unit ID, from 0 to 5.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only information on
that destination. Enter the IP address in dotted decimal format (A.B.C.D). Enter the mask
in slash prex format (/X).
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prex.
summary (OPTIONAL) Enter the keyword summary to view the total number of prexes in the FIB.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
630 IPv4 Routing