Concept Guide

• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#debug ip udp-helper
UDP helper debugging is on
01:20:22: Pkt rcvd on Te 4/1 with IP DA (0xffffffff) will be sent on Te 4/2 Te
4/3
Vlan 3
01:44:54: Pkt rcvd on Te 5/1 is handed over for DHCP processing.
Related Commands
ip udp-broadcast-address — congures a UDP IP address for broadcast.
ip udp-helper udp-port — enables the UDP broadcast feature on an interface.
show ip udp-helper — displays the congured UDP helper(s) on all interfaces.
ip udp-broadcast-address
Congure an IP UDP address for broadcast.
Syntax
ip udp-broadcast-address address
To delete the conguration, use the no ip udp-broadcast-address address command.
Parameters
address Enter an IP broadcast address in dotted decimal format (A.B.C.D).
Defaults Not congured.
Command Modes INTERFACE (cong-if)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Enter an IP broadcast address in dotted decimal format (A.B.C.D).
Usage Information When a UDP broadcast packet is ooded out of an interface, and the outgoing interface is congured using this
command, the outgoing packet’s IP destination address is replaced with the congured broadcast address.
Related Commands
debug ip udp-helper — enables debug and displays the debug information on a console.
show ip udp-helper — displays the congured UDP helpers on all interfaces.
590 Interfaces