Concept Guide

show mac access-lists
Display all of the Layer 2 ACLs congured in the system, whether or not they are applied to an interface, and the count of matches/
mismatches against each ACL entry displayed.
Syntax
show mac access-lists [access-list-name] [interface interface] [in | out]
Parameters
access-list-name Enter the name of a congured MAC ACL, up to 140 characters.
interface interface Enter the keyword interface then the one of the following keywords and slot/port or
number information:
• For a Port Channel interface, enter the keywords port-channel and then enter a
number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet and
then enter the slot/port information.
• For a VLAN interface enter the keyword VLAN and then the vlan id.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show mac accounting access-list
Display MAC access list congurations and counters (if congured).
Syntax
show mac accounting access-list access-list-name interface interface in | out
Parameters
access-list-name Enter the name of a congured MAC ACL, up to 140 characters.
interface interface Enter the keyword interface then the one of the following keywords and slot/port or
number information:
• For a Port Channel interface, enter the keywords port-channel and then enter a
number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet and
then enter the slot/port information.
• For a VLAN interface enter the keyword VLAN and then the vlan id
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes
• EXEC
• EXEC Privilege
Access Control Lists (ACL) 185