Concept Guide
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage Information If there are no ber ports in the unit, just the header under show inventory media displays. If there are ber
ports but no optics inserted, the output displays "Media not present or accessible".
Example
Dell#show inventory
System Type : PE-FN-410S-IOA
System Mode : 1.0
Software Version : 1-0(0-1859)
Unit Type Serial Number Part Number Rev Piece Part ID Rev
Svc Tag Exprs Svc Code
-----------------------------------------------
* 0 PowerEdge-FN-410S-IOA TW000000000020 07NVPVX01 X01
TW-07NVPV-00000-000-0020 X01 N/A N/A
* - Management Unit
Software Protocol Configured
------------------------------------------------
DCBX
FIP Snooping
IGMP
iSCSI
LLDP
SNMP
Dell#
Example (media)
Dell#show inventory media ?
<0-5> Slot number
| Pipe through a command
Dell#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------
0 9 SFP+ 10GBASE-SR AHJ0BU3 Yes
0 10 SFP+ 10GBASE-CU5M APF125100446U1 Yes
0 11 SFP+ 10GBASE-SR CD23FM12H Yes
0 12 SFP+ 10GBASE-SR CD23FM0XT Yes
Dell#
Related Commands
show cong (from INTERFACE VLAN mode) — displays information on a specic physical interface or virtual
interface.
show memory
Display current memory usage on the M I/O Aggregator.
Syntax
show memory [stack-unit 0–5]
Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack
member to display memory information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Control and Monitoring 115