CLI Guide

Defaults none
Command Modes EXEC
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Added support for removing the Sonet interface on the MXL 10/40GbE Switch IO
Module.
7.4.1.0 Introduced.
Usage Information The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 0 po 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress
Flag Port Port
MAC Port
------------------------------------------------------------
00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24
0:01:e8:8a:fd:76 0/0
00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32
00:01:e8:8a:fd:76 Vl 100(0/1)
00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32
00:01:e8:8a:fd:76 Po 128
00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32
00:01:e8:8a:fd:76 Po 128
00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0
00:01:e8:8a:fd:76 Vl 1020(Po 100)
Dell#
Related Commands
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list – displays the redirect-list conguration.
• show cam-usage – displays the CAM usage on ACL, router, or switch.
show ip redirect-list
View the redirect list conguration and the interfaces it is applied to.
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-name Enter the name of a congured Redirect list.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Added support for removing the Sonet interface on the MXL.
7.4.1.0 Introduced.
988 Policy-based Routing (PBR)