CLI Guide

ip ftp username
Assign a user name for outgoing FTP connection requests.
Syntax
ip ftp username username
Parameters
username Enter a text string as the user name up to 40 characters long.
Defaults No user name is congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Congure a password with the ip ftp password command.
Related Commands ip ftp password — sets the password for FTP connections.
line
Enable and congure console and virtual terminal lines to the system. This command accesses LINE mode, where you can set the access
conditions for the designated line.
Syntax
line {console 0 | vty number [end-number]}
Parameters
console 0 Enter the keyword console 0 to congure the console port.
The console option is <0-0>.
vty number Enter the keyword vty followed by a number from 0 to 9 to congure a virtual terminal
line for Telnet sessions.
The system supports 10 Telnet sessions.
end-number
(OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to congure.
You can congure multiple lines at one time.
Defaults Not congured
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
98 Control and Monitoring