CLI Guide

Defaults 100 megabits per second.
Command Modes ROUTER OSPFv3
Supported Modes Full-Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the FN IOM
9.9(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Example
Dell#show running-config ospf
!
ipv6 router ospf 10
log-adjacency-changes
auto-cost reference-bandwidth 2000
Dell(conf-ipv6-router_ospf)#auto-cost reference-bandwidth ?
<1-4294967> Reference bandwidth in Mbits/second (default = 100)
Dell(conf-ipv6-router_ospf)#no auto-cost ?
reference-bandwidth Use reference bandwidth method to assign OSPF cost
<cr>
Dell(conf-ipv6-router_ospf)#
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-conguring the process.
Syntax
clear ipv6 ospf process
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ipv6 ospf bfd
Display debug information and interface types for BFD on OSPF IPv6 packets.
Syntax
[no] debug ipv6 ospf bfd [interface]
Open Shortest Path First (OSPFv2 and OSPFv3) 961