CLI Guide

Command Modes MULTIPLE SPANNING TREE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
Dell(conf-mstp)#
show spanning-tree mst conguration
View the multiple spanning tree conguration.
Syntax
show spanning-tree mst configuration
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Enable the multiple spanning tree protocol prior to using this command.
Example
Dell#show spanning-tree mst configuration
MST region name: CustomerSvc
Revision: 2
MSTI VID
10 101-105
Dell#
show spanning-tree msti
View the multiple spanning tree instance.
Syntax
show spanning-tree msti [instance-number [brief]] [guard]
Parameters
instance-number (Optional) Enter the multiple spanning tree instance number. The range is from 0 to 63.
brief (Optional) Enter the keyword brief to view a synopsis of the MST instance.
Multiple Spanning Tree Protocol (MSTP) 871