CLI Guide

Version Description
9.3(0.0) Introduced on the MXL Switch .
clear ip msdp sa-cache
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries.
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format (A.B.C.D.).
rejected-sa Enter the keywords rejected-sa to clear the cache source-active entries that are
rejected because the RPF check failed, an SA lter or limit is congured, the RP or MSDP
peer is unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised entries. It applies the
redistribute lter (if present) while adding the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL Switch .
clear ip msdp statistic
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries.
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format (A.B.C.D.).
rejected-sa Enter the keyword rejected-sa to clear the cache source-active entries that are
rejected because the RPF check failed, an SA lter or limit is congured, the RP or MSDP
peer is unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised entries. It applies the
redistribute lter (if present) while adding the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
854 Multicast Source Discovery Protocol (MSDP)